Amplifier for Force and Pressure Transducer Manual
The ISO 510 A module is a precision differential input amplifier with low noise and thermal stability. These features make it ideal to work with low impedance bridge system transducers. It supplies 10V DC as excitation voltage to the bridge.
It has been designed to work with a wide range of transducers, such as: force, pressure, displacement and respiration. It can work with any kind of bridge transducer with impedance lower than or equal to 1.5 kW.
The ISO 510A module has:
- Two gain controls:
- A rotator switch with scales from 50 to 10000 for coarse
- A fine adjustment to achieve higher
- A balance control with 10 turns to achieve higher
- Possibility to select between AC amplification or DC
- Signal filtering to eliminate noise and non-desired
- Input and output
The four modules are mounted in a BR4740A box that contains the power supply and the analog to digital USB converter board.
What You Will Be Learning:
- Unpacking and Equipment Installation
- Maintenance
- Equipment Description
- Equipment Connection
- Amplification Theory
- Working with the Equipment
- Troubleshooting
- Preventative Maintenance
- Specification
- Declaration of Conformity
Comments
0 comments
Please sign in to leave a comment.